Send data to barcode scanner via RS232 serial port

Question

Send data to barcode scanner via RS232 serial port

I have a barcode scanner that connects through an RS232 serial port. I need to write a program to connect this device to a PC and transfer data. I already wrote some basic methods to initialize the communication line and tried to test by sending a BEEP command to the device, but it does not beep as expected. So I think there is something wrong with my original code. Please help me fill out the source code. Below is the written code

01) DeviceRS232.h

#ifndef DEVICERS232_H
#define DEVICERS232_H

extern "C"
{
#include <stdio.h>
#include <string.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <limits.h>
}

#include <string>

#define MAX_SERIAL_PORT_NO  30



class DeviceRS232
{
    public:
        DeviceRS232();
        virtual ~DeviceRS232();

        int fdRS232;                    //  file descriptor for the serial port

        void setSerialPort(std::string sp);
        void setBaudRate(long baud);
        void setDataBits(int dataBit);
        void setStopBits(int stopBit);
        void setNumberOfParityBits(int nparityBits);
        void setDefaultAttributes();
        long getBaudRate();
        std::string getSerialPort();
        int openSerialPort();
        int readUserConfiguration();
        int sendDataBuffer(const unsigned char *dataBuffer, size_t bufferSize);
        void closeSerialPort();


    protected:
        std::string serialPort;         //  Serial port like /dev/ttyS0
        long baudRate;                  //  Scanner baud rate
        int dataBits;                   //  data bits
        int stopBits;                   //  stop bits
        int numberOfParityBits;         //  number of parity bits
        termios oldSerialPortSetting;   //  Current values of termios structure for /dev/ttyS0
        termios newSerialPortSetting;   //  new termios attributes for /dev/ttyS0


    private:
};

#endif // DEVICERS232_H

2) DeviceRS232.cpp

#include "DeviceRS232.h"

DeviceRS232::DeviceRS232()
{
    //ctor
}

DeviceRS232::~DeviceRS232()
{
    //dtor
}

void DeviceRS232::setSerialPort(std::string sp)
{
    serialPort = sp;
}

void DeviceRS232::setBaudRate(long baud)
{
    baudRate = baud;
}

void DeviceRS232::setDataBits(int dataBit)
{
    dataBits = dataBit;
}

void DeviceRS232::setStopBits(int stopBit)
{
    stopBits = stopBit;
}

void DeviceRS232::setNumberOfParityBits(int nparityBits)
{
    numberOfParityBits = nparityBits;
}

void DeviceRS232::setDefaultAttributes()
{
    std::string sp = "/dev/ttyS0";
    long baud = 9600;
    int dataBit = 1;
    int stopBit = 1;
    int nparityBits = 0;

    setSerialPort(sp);
    setBaudRate(baud);
    setDataBits(dataBit);
    setStopBits(stopBit);
    setNumberOfParityBits(nparityBits);
}

long DeviceRS232::getBaudRate()
{
    return baudRate;
}

std::string DeviceRS232::getSerialPort()
{
    return serialPort;
}

int DeviceRS232::openSerialPort()
{
    int fd, baudr, status, portStatus;
    setDefaultAttributes();

    switch(getBaudRate())
    {
        case      50 : baudr = B50;
                       break;
        case      75 : baudr = B75;
                       break;
        case     110 : baudr = B110;
                       break;
        case     134 : baudr = B134;
                       break;
        case     150 : baudr = B150;
                       break;
        case     200 : baudr = B200;
                       break;
        case     300 : baudr = B300;
                       break;
        case     600 : baudr = B600;
                       break;
        case    1200 : baudr = B1200;
                       break;
        case    1800 : baudr = B1800;
                       break;
        case    2400 : baudr = B2400;
                       break;
        case    4800 : baudr = B4800;
                       break;
        case    9600 : baudr = B9600;
                       break;
        case   19200 : baudr = B19200;
                       break;
        case   38400 : baudr = B38400;
                       break;
        case   57600 : baudr = B57600;
                       break;
        case  115200 : baudr = B115200;
                       break;
        case  230400 : baudr = B230400;
                       break;
        case  460800 : baudr = B460800;
                       break;
        case  500000 : baudr = B500000;
                       break;
        case  576000 : baudr = B576000;
                       break;
        case  921600 : baudr = B921600;
                       break;
        case 1000000 : baudr = B1000000;
                       break;
        default      : printf("invalid baudrate\n");
                       return(1);
                       break;
    }

    //  Open serial port
    fd = open(getSerialPort().c_str(),  O_RDWR | O_NOCTTY | O_NDELAY);
    if(fd == -1)
    {
        printf("Unable to open serial port...\n");
        return 1;
    }

    fdRS232 = fd;
    status = tcgetattr(fdRS232, &oldSerialPortSetting);
    if(status == -1)
    {
        close(fdRS232);
        printf("Unable to get serial port attributes...\n");
        return 1;
    }

    memset(&newSerialPortSetting, 0, sizeof(newSerialPortSetting));
    newSerialPortSetting.c_cflag = baudr | CS8 | CLOCAL | CREAD; //
    newSerialPortSetting.c_iflag = IGNPAR;
    newSerialPortSetting.c_oflag = 0;
    newSerialPortSetting.c_lflag = 0;
    newSerialPortSetting.c_cc[VMIN] = 0;
    newSerialPortSetting.c_cc[VTIME] = 0;

    status = tcsetattr(fdRS232, TCSANOW, &newSerialPortSetting);
    if(status==-1)
    {
        close(fdRS232);
        perror("unable to adjust portsettings ");
        return 1;
    }

    //  Get the status of opened serial port
    if(ioctl(fdRS232, TIOCMGET, &portStatus) == -1)
    {
        perror("Unable to get port status");
        return 1;
    }

    //  Tern on DTR and RTS
    portStatus |= TIOCM_DTR;
    portStatus |= TIOCM_RTS;

    //  Set the status of the port with new DTR, RTS values
    if(ioctl(fdRS232, TIOCMSET, &portStatus) == -1)
    {
        perror("Unable to set port status...");
        return 1;
    }

  return 0;
}

int DeviceRS232::sendDataBuffer(const unsigned char *dataBuffer, size_t bufferSize)
{
    return write(fdRS232, dataBuffer, bufferSize);
}

void DeviceRS232::closeSerialPort()
{
    int portStatus;

    if(ioctl(fdRS232, TIOCMGET, &portStatus) == -1)
    {
        perror("Unable to get the port status");
    }

    //  Tern off DTR and RTS
    portStatus &= ~TIOCM_DTR;
    portStatus &= ~TIOCM_RTS;

    //  Set the status of the port with new DTR, RTS values
    if(ioctl(fdRS232, TIOCMSET, &portStatus) == -1)
    {
        perror("Unable to set port status...");
    }

    close(fdRS232);
}

3) main.cpp

#include <iostream>
extern "C"
{
    #include <stdlib.h>
    #include <stdio.h>
    #include <unistd.h>
}
#include "DeviceRS232.h"

using namespace std;

int main()
{

    //char sendBuffer[4096] = "                        ";
    unsigned char sendBeep[] = {0x05, 0xE6, 0x04, 0x00, 0x0D, 0x00, 0x00};
    unsigned char ledOn[] = {0x05, 0xE7, 0x04, 0x00, 0x0D, 0x00};
    unsigned char val[7];

    cout << "********************** RS232 - SSI **********************" << endl << endl;
    DeviceRS232 dev_rs232;
    dev_rs232.setDefaultAttributes();
    dev_rs232.openSerialPort();

    //----------------------------------------------------
    //for(int x=0; x<10; x++)
    //{
    //    dev_rs232.sendDataBuffer(sendBeep, sizeof(sendBeep));
    //}
    //----------------------------------------------------

    int sizeSent = dev_rs232.sendDataBuffer(sendBeep, sizeof(sendBeep));
    if( sizeSent > 0)
    {
        printf("Data sent: %d...\n", sizeSent);
    }

    sleep(10);

    dev_rs232.closeSerialPort();
    cout << "*********************************************************" << endl;


    return 0;
}

unsigned char is sendBeep[] = {0x05, 0xE6, 0x04, 0x00, 0x0D, 0x00, 0x00};

written according to the barcode serial port communication protocol specification.

(Edited to add output) Out put:

********************** RS232 - SSI **********************

Data sent: 7...
*********************************************************

Process returned 0 (0x0)   execution time : 10.006 s
Press ENTER to continue.

All advice and suggestions are appreciated. Thank.

+2

c ++ c serial-port barcode-scanner

Dig the code 27 Mar 14 at 8:33

source to share

1 answer

Dig the code · Accepted Answer · 2014-03-28T07:01:05+0000

#include <iostream>
extern "C"
{
    #include <stdlib.h>
    #include <stdio.h>
    #include <unistd.h>
}
#include "DeviceRS232.h"

using namespace std;

int main()
{

    unsigned char sendBuffer[4096] = "Test test test...";
    unsigned char sendBeep[] = {0x05, 0xE6, 0x04, 0x00, 0x11, 0x46, 0x00};
    unsigned char ledOn[] = {0x05, 0xE7, 0x04, 0x00, 0x0D, 0x00};
    unsigned char val[7];

    //-------------------------------------------------------------------------
    unsigned char commonBuffer[257];

    int iChecksum;
    int i;
    commonBuffer[ 1 ] = (unsigned char)0xC6;
    commonBuffer[ 2 ] = (unsigned char)0x04;
    commonBuffer[ 3 ] = (unsigned char)0x08; // Permanant Chnage
    commonBuffer[ 4 ] = (unsigned char)0x11; // Beep after setting. FF for No Beep
    commonBuffer[ 5 ] = (unsigned char)0xEE; // Decorder parameter to set (238)
    commonBuffer[ 6 ] = (unsigned char)0x01; // Value to set

    commonBuffer[ 0 ] = (unsigned char)0x07; // Length

    iChecksum = 0;
    for (i = 0; i < 7; i++)
    {
        iChecksum += commonBuffer[i];
    }

    commonBuffer[i++] = (char)(((-iChecksum) >> 8) & 0xFF); // Add Checksum into the command
    commonBuffer[i++] = (char)((-iChecksum) & 0xFF);
    //-------------------------------------------------------------------------


    cout << "********************** RS232 - SSI **********************" << endl << endl;
    DeviceRS232 dev_rs232;
    dev_rs232.setDefaultAttributes();
    dev_rs232.openSerialPort();

    //----------------------------------------------------
    //for(int x=0; x<10; x++)
    //{
    //    dev_rs232.sendDataBuffer(sendBeep, sizeof(sendBeep));
    //}
    //----------------------------------------------------

    int sizeSent = dev_rs232.sendDataBuffer(commonBuffer, sizeof(commonBuffer));
    if( sizeSent > 0)
    {
        printf("Data sent: %d...\n", sizeSent);
    }

    sleep(1);

    dev_rs232.closeSerialPort();
    cout << "*********************************************************" << endl;


    return 0;
}

Send data to barcode scanner via RS232 serial port

More articles: