Read and Write EEPROM via I2C with Linux
I am trying to read and write an Atmel 24C256 EEPROM using a Raspberry Pi B + versus I2C but I am having a hard time getting it all working right.
Here is the code I have so far:
#include <stdio.h>
#include <stdlib.h>
#include <linux/i2c-dev.h>
#include <fcntl.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <errno.h>
#include <linux/i2c.h>
#define DEVICE_PATH "/dev/i2c-1"
#define PAGE_SIZE 64
#define DEVICE_ADDR 0x50 // 0b1010xxxx
int file_desc;
char buffer[PAGE_SIZE + 2]; // 64 bytes + 2 for the address
void teardownI2C()
{
int result = close(file_desc);
}
void setupI2C()
{
file_desc = open(DEVICE_PATH, O_RDWR);
if(file_desc < 0)
{
printf("%s\n", strerror(errno));
exit(1);
}
if(ioctl(file_desc, I2C_SLAVE, DEVICE_ADDR) < 0)
{
printf("%s\n", strerror(errno));
teardownI2C();
exit(1);
}
}
int write_to_device(char addr_hi, char addr_lo, char * buf, int len)
{
struct i2c_rdwr_ioctl_data msg_rdwr;
struct i2c_msg i2cmsg;
char my_buf[PAGE_SIZE + 2];
if(len > PAGE_SIZE + 2)
{
printf("Can't write more than %d bytes at a time.\n", PAGE_SIZE);
return -1;
}
int i;
my_buf[0] = addr_hi;
my_buf[1] = addr_lo;
for(i= 0; i < len; i++)
{
my_buf[2+i] = buf[i];
}
msg_rdwr.msgs = &i2cmsg;
msg_rdwr.nmsgs = 1;
i2cmsg.addr = DEVICE_ADDR;
i2cmsg.flags = 0;
i2cmsg.len = 2+len;
i2cmsg.buf = my_buf;
if(ioctl(file_desc,I2C_RDWR,&msg_rdwr)<0)
{
printf("write_to_device(): %s\n", strerror(errno));
return -1;
}
return 0;
}
int read_from_device(char addr_hi, char addr_lo, char * buf, int len)
{
struct i2c_rdwr_ioctl_data msg_rdwr;
struct i2c_msg i2cmsg;
if(write_to_device(addr_hi, addr_lo ,NULL,0)<0)
{
printf("read_from_device(): address reset did not work\n");
return -1;
}
msg_rdwr.msgs = &i2cmsg;
msg_rdwr.nmsgs = 1;
i2cmsg.addr = DEVICE_ADDR;
i2cmsg.flags = I2C_M_RD;
i2cmsg.len = len;
i2cmsg.buf = buf;
if(ioctl(file_desc,I2C_RDWR,&msg_rdwr)<0)
{
printf("read_from_device(): %s\n", strerror(errno));
return -1;
}
return 0;
}
void fill_buffer(char *buf)
{
int i = 0;
while(i < PAGE_SIZE && *buf)
{
buffer[i+2] = *buf++;
}
while(i++ < PAGE_SIZE-1)
{
buffer[i+2] = '*'; // fill the buffer with something
}
}
int main()
{
setupI2C(); //setup
fill_buffer("Here are some words.");
write_to_device(0x01, 0x00, buffer, PAGE_SIZE);
char newbuf[PAGE_SIZE];
if(read_from_device(0x01, 0x00, newbuf, PAGE_SIZE)>0)
{
printf("%s\n", newbuf);
}
teardownI2C(); //cleanup
return EXIT_SUCCESS;
}
Writing to the device as in a string write_to_device(0x01, 0x00, buffer, PAGE_SIZE);
does not throw any errors, but when I try to read from the device I have to write the "dummy" byte according to the spec and then try to read the device, but for whatever reason, writing the file bytes results in error "I / O error". I cannot figure out how it works. I am using two resources for the tutorial, Linux I2C-Dev Documentation and an example from a similar EEPROM device. I'm kind of stuck here and don't know what to try. Any suggestions or pointers are appreciated!
source to share
Alternatively, you can access it through a kernel driver at24.c
if you can compile and install a different kernel device tree for your Raspberry Pi.
In the kernel device tree, you must specify the type and address of the EEPROM and to which the I²C bus is connected. I'm not sure about the Raspberry Pi, but for the BeepleBone Black EEPROM, it looks like this:
&i2c0 {
eeprom: eeprom@50 {
compatible = "at,24c32";
reg = <0x50>;
};
};
For your device, you must specify compatible = "at,24c256";
Make sure the kernel config has CONFIG_EEPROM_AT24=y
(or =m
).
Then you should be able to access the EEPROM from user space with something like /sys/bus/i2c/devices/0-0050/eeprom
or /sys/bus/i2c/drivers/at24/0-0050/eeprom
.
source to share
Maybe this can help. http://www.richud.com/wiki/Rasberry_Pi_I2C_EEPROM_Program as it apparently handles the device you are trying to program and also explains some caveats about 24c256 addressing
source to share
My code:
enter code here
__s32 write_eeprom(__s32 fd,__u32 offset,__u32 len,__u8 *buf)
{
__s32 ret;
struct i2c_rdwr_ioctl_data msg_set;
struct i2c_msg iomsgs;
__u32 sended, sending;
__u8 temp[ONE_PAGE + 1];
if((offset + len) > BYTES_MAX || len == 0)
{
printf("write too long than BYTES_MAX\n");
return -1;
}
sended = 0;
iomsgs.addr = DEVICE_ADDR;
iomsgs.flags = 0; //write
iomsgs.buf = temp;
msg_set.msgs = &iomsgs;
msg_set.nmsgs = 1;
while(len > sended)
{
if(len - sended > ONE_PAGE)
sending = ONE_PAGE;
else
sending = len - sended;
iomsgs.len = sending + 1;
temp[0] = offset + sended;
memcpy(&temp[1], buf + sended, sending);
//printf("sending:%d sended:%d len:%d offset:%d \n", sending, sended, len, offset);
ret = ioctl(fd, I2C_RDWR, (unsigned long)&msg_set);
if(ret < 0)
{
printf("Error dring I2C_RDWR ioctl with error code: %d\n", ret);
return ret;
}
sended += sending;
usleep(5000);
}
return sended;
}
source to share
Small and simple program to understand simple eeprom management
/*
Simple program to write / read the eeprom AT24C32.
Developed and tested on the Raspberry pi3B jessie
To create the executable use the following command:
gcc -Wall -o thisprogram.exe thisprogram.c
*/
#include <stdio.h>
#include <sys/ioctl.h> // ioctl
#include <fcntl.h> // open
#include <unistd.h> // read/write usleep
#include <time.h>
#include <netinet/in.h> // htons
#include <linux/i2c-dev.h>
#pragma pack(1)
#define PAGESIZE 32
#define NPAGES 128
#define NBYTES (NPAGES*PAGESIZE)
#define ADDRESS 0x57 // AT24C32 address on I2C bus
typedef struct {
ushort AW;
char buf[PAGESIZE+2];
}WRITE;
static WRITE AT = {0};
int main() {
int fd;
char bufIN[180] = {0};
time_t clock=time(NULL);
snprintf(AT.buf, PAGESIZE+1, "%s: my first attempt to write", ctime(&clock)); // the buffer to write, cut to 32 bytes
if ((fd = open("/dev/i2c-1", O_RDWR)) < 0) { printf("Couldn't open device! %d\n", fd); return 1; }
if (ioctl(fd, I2C_SLAVE, ADDRESS) < 0) { printf("Couldn't find device on address!\n"); return 1; }
AT.AW = htons(32); // I will write to start from byte 0 of page 1 ( 32nd byte of eeprom )
if (write(fd, &AT, PAGESIZE+2) != (PAGESIZE+2)) { perror("Write error !"); return 1; }
while (1) { char ap[4]; if (read(fd,&ap,1) != 1) usleep(500); else break; } // wait on write end
if (write(fd, &AT, 2) != 2) { perror("Error in sending the reading address"); return 1; }
if (read(fd,bufIN,PAGESIZE) != PAGESIZE) { perror("reading error\n"); return 1;}
printf ("\n%s\n", bufIN);
close(fd);
return 0;
}
source to share